-
- P-800 triplex Drilling Mud Pump with API Spec 7K certificate for oil&gas drilling rig
-
P series mud pumps which are compact-sized with reliable performance can be used for offshore drilling equipment with higher quality requirements. There are 5 types of P series mud pumps for selection,whose input power ranges from 800HP (597kW) to 2200HP (1640 kW).
Features for Power End of P Series Mud Pump
The enclosure is an integral bearing block structure by cast-welding with stress relief after welding.
The gear shaft is of overall structure, a belt pulley and a chain wheel can be mounted on any end or both ends.
By adopting a roller bearing, stable operation and bearing capability are promoted.
Lubrication in parts of gears, bearings, crossheads etc. adopts splash lubrication.
The spray system is used for cooling and lubricating the piston and cylinder sleeve surface.
By adopting clamping type connection for the cylinder sleeve and the piston rod, it is easy to realize rapid assembly and disassembly as well as replacement.
With hard alloy metal cylinder sleeve, its service life is long.
By utilizing one-piece reversed Y-type gears, it realizes stable operation.
Features for Hydraulic End of P Series Mud Pump
The hydraulic cylinders are arranged in L type manner, which can enable liquid flow to be stable as well as reduce vibration and pressure fluctuation.
They combination type hydraulic cylinders can be exchanged mutually and replaced independently.
By adopting a rapid-rotation bonnet, it is easy to realize rapid assembly and disassembly as well as installation.
The wedge locking type bonnet is an optional piece, the locking foundation is solid and reliable, and it is simple and convenient to assemble and disassemble.
The suction pipe can be sucked from the front part or two sides.
The discharge pipe can be connected out from two sides.
The piston and cylinder sleeve chamber is of an opening type, which is convenient for observation.
By utilizing a combination type piston rod structure, the piston can be replaced without dismantling the cylinder sleeve.
| Model | P-800 | P-1000 | P-1300 | P-1600 | P-2200 |
Height floor to center of Front inlet
suction in. (mm) | 103/4(273) | 131/4(337) | 131/4(337) | 161/2(419) | 197/8(505) |
Height, floor to center of discharge
in. (mm) | 351/4(895) | 381/4(972) | 391/4(997) | 451/4(1149) | 491/4(1251) |
| Overall length over skids in.(mm) | 1615/8(4105) | 1761/4(4477) | 1865/8(4740) | 209(5309) | 2181/4(5544) |
| Width over frame in. (mm) | 629/16(1589) | 671/8(1705) | 713/8(1813) | 755/8(1997) | 91(2311) |
| Width over pinion shaft in.(mm) | 937/8(2384) | 1011/4(2572) | 1071/4(2724) | 1133/4(2889) | 1253/4(3194) |
| Height, floor to top of gear case in.(mm) | 60(1524) | 64(1626) | 67(1702) | 75(1905) | 841/4(2139) |
| Height over fluid cylinders in.(mm) | 517/8(1318) | 547/8(1394) | 557/8(1419) | 6215/16(1599) | 691/8(1756) |
| Max. input horsepower HP (kw) | 800(597) | 1000(746) | 1300(969) | 1600(1193) | 2200(1640) |
| Rated pump speed | 160 | 150 | 140 | 120 | 105 |
| Max. fluid cylinder liner bore in.(mm) | 61/4(158.8) | 63/4(171.5) | 63/4(171.5) | 71/4(184.2) | 9(228.6) |
| Stroke in.(mm) | 81/2(215.9) | 91/4(235) | 10(254) | 12(304.8) | 14(355.6) |
Hydrostatic test pressure of standard fluid
cylinders psi (kg/cm2) | 10,000(703) | 10,000(703) | 10,000(703) | 10,000(703) | 11,250(791) |
| Ratio of gears | 2.463 | 2.658 | 2.853 | 3.439 | 3.969 |
| Suction connection, ASA-150 lb. R. J. flange | 8 | 8 | 8 | 10 | 10 |
Discharge connection cross w/API-5000-lb.
R. J. flange in. | 4 | 5 | 5 | 6 | 6 |
| Valve pot, API number | MOD.6 | MOD.6 | MOD.6 | MOD.7 | MOD.8 |
| Weight-complete, less sheave lbs.(kg) | 26,970
(12,235) | 33,200
(15,060) | 42,550
(19,300) | 54,700
(24,810) | 82,000
(37,195) |
ATO Advantages:
1 Customize products with different repuqirements for customers
2 All factory are designated by Sinopec&CNPC
3 Raw materials are strictly tested,confirm to API standards
4 Strong professional team, find the most suitable products for customers
5 Customer -Focused, to provice reliable and efficient one-stop worry-free service
6 High quality pumps parts supplier
7 Assurance pf reliable source
8 Flexible solutions for all your questions
9 safe and convenient logistics channel
10 perfect after-sale tracking service team, provice one to one service to customers in time
Product Tags:
|
|
P 800 Triplex Mud Pump For Oil Gas Drilling Rig Images
|
